Operation panel
No. | Name | Function |
|---|---|---|
1 | Thickness selection switches | Select the cutting size of the food. |
Indication lamp | The indication lamp of the selected size turns ON. | |
2 | 運転(START) switch | Starts operation (conveyors and blade rotate). |
“運転(START)” lamp | Press 運転(START), the lamp will light. It turns off when the machine is not working. | |
3 | 停止(STOP) switch | Stops operation (conveyors and blade rotate). |
4 | 電源(POWER) switch | Turns the operation panel power on and off. |
“電源(POWER)” lamp | It lights up when the power is turned ON. Shows that operation is possible. | |
5 | “コンベヤ異常” lamp | It lights up when the machine comes to a stop due to errors of overload or other problems occurring to the conveyors. |
6 | “カッター異常” lamp | It lights up or flashes when the machine comes to a stop for errors due to an overload or other problems occurring to the cutters. |
7 | 異常復帰 switch【Safety device】 | It is used to restore the machine from an error stop while the “コンベヤ異常” lamp or the “カッター異常” lamp is ON. (* 1) |