Check operation of proximity switch of conveyor cover

This test checks if the blade and conveyor can stop immediately when the conveyor cover is accidentally opened amid operation.

For your safety, make sure that the conveyor is not activated when the conveyor cover is open.

If the cutter cover is not closed properly, operation cannot be checked.

Compulsory	Open or close the conveyor cover slowly If you open and close the cover strongly or let go your hands, the hinge or conveyor cover may break and its debris may mix into the food.

Check operation of proximity switch of cutter cover

This test checks if the blade and conveyor can stop immediately when the cutter cover is accidentally opened amid operation.

For your safety, remove the blade and make sure that the rotating shaft of the blade is not activated when the cutter cover is open.

Prohibited	Do not check the operation of the proximity switch of the cutter cover with the blade attached. A defective proximity switch may make the blade rotate accidentally, causing your hands or fingers to get cut. Check the following points before inspection. Make sure the blade is removed. Make sure no one is near the cutter cover.