Standard accessories

Check the standard accessories before use.

Part name	Contents	Qty
Operation Manual	Safety precautions, Name and function of each section, Usage, Clean and wash, Installation and maintenance, Optional accessories, Important notes.	1 book
Upper belt	Surface material (blue): moisture-resistant polyurethane Base material (white): low-shrink polyester canvas Suitable temperature: -20°C ~ +80°C	1 pc
Lower belt		1 pc
Tool kit 1 set	Tool box Double-ended wrench (10mm/13mm) Double-ended wrench (17mm/13mm) Double-ended wrench (17mm/19mm) x 2 L type box wrench (LB0017)	1 set
Gap gauge	0.3mm 0.5mm 1.0mm	1 set
Hose clamp	It is used to connect a hose (not included) to the water supply port in the cutter cover.	1 pc
Anchor mounting plates	Used during installation to prevent the machine from falling over.	2 pcs
Food machinery oil (300ml)	Manufacturer: NOK KLUEBER Name: KLUBER L40 Chemical name: vegetable oil-based lubricant spray Component: mixture of plant-based oil and butane	1 can
Protective gloves	Cut-resistant gloves	1 set